Description
DescriptionFilament Properties Table3D PRINTING FILAMENTePLA-MatteDensity(g/cm3)1.174Heat Distortion Temp(℃,0.45MPa)51Melt Flow Index(g/10min)2.1（190℃/2.16kg）Tensile Strength(MPa)34.56Elongation at Break(%)56.1Flexural Strength(MPa)41.21Flexural Modulus(MPa)1119.41IZOD Impact Strength(kJ/㎡)33.15Durability4/10Printability9/10Recommended printing parametersExtruder Temperature(℃)190 – 230℃Recommended temperature 215℃Bed temperature(℃)45 – 60°CFan Speed100%Printing Speed40 – 100mm/sHeated BedOptionalRecommended Build SurfacesMasking paper, PVP solid glue, PEIDescriptionMatte pla filament has no smell when printing, which is safe and environmentally friendly; And the reel is made by reusing injection molding of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper. Make 3D printing more sustainable with the environmental protection concept; The matte pla surface is delicate and does not show layer lines; the filament is not easy to break which made the printing is smooth for a long time without clogging.PLA matte filamentcan be used for early concept models and rapid prototyping. Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models.SellingpointEnvironmental friendlyCost-effectiveHigh-speed printingEasy to peel off the supportExcellent printabilityHard to breakMatte surface effectLow density* ApplicationDecorative partsCOSPLAY* Print model
Avis
Il n’y a pas encore d’avis.